Samsung
Dryer
⛔ Unplug Now
Samsung Dryer Error Code FE
Samsung Dryer error code FE: Frequency error — voltage issue.
Should I unplug it?
⛔ Yes — unplug now
Stop using — voltage issues can damage electronics or cause fire. Check the circuit breaker and outlet.
Can I fix it myself?
Technician Recommended
Part: Power supply / circuit breaker / outlet
How much will it cost?
DIY: $0–$50 (if breaker or outlet)
Technician: $100–$400
⏱ 30–90 min
What Does Error FE Mean on Your Samsung Dryer?
Samsung Dryer error code FE: Frequency error — voltage issue.
What typically fails: Power supply / circuit breaker / outlet
What You're Probably Seeing
- → Error code displayed
- → Dryer not completing cycle
- → Clothes still wet after full cycle
What to Try First
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Non-contact voltage tester
· Time: 30–90 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Samsung Dryer error code FE mean? ▼
Error code FE on a Samsung Dryer means: Frequency error — voltage issue. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code FE? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error FE returns, the root cause (frequency error — voltage issue) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code FE? ▼
It depends on the cause. Most FE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.