🔍
Samsung DVE50R85*** Dryer

Samsung DVE50R85*** — Error Code Et

Samsung DVE50R85*** error code Et: Power failure during cycle.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Looking for the full diagnosis and repair guide? View complete Samsung Dryer error code Et guide →

Repair guidance: the symptoms and steps below come from the canonical Samsung Dryer Et guide and apply to DVE50R85*** unless your manual says otherwise.

Symptoms on DVE50R85***

How to Fix Error Et on DVE50R85***

  1. 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

Questions People Also Ask for Error Et

What does Samsung Dryer error code Et mean?
Error code Et on a Samsung Dryer means: Power failure during cycle. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code Et?
First, unplug the dryer for 60 seconds to reset the control board. If error Et returns, the root cause (power failure during cycle) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code Et?
It depends on the cause. Most Et errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More for this Model