Samsung
DV316LEW
Dryer
Samsung DV316LEW — Error Code hE
Samsung DV316LEW error code hE: Heater error — no heat.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Samsung Dryer error code hE guide →
Repair guidance: the symptoms and steps below come from the canonical Samsung Dryer hE guide and apply to DV316LEW unless your manual says otherwise.
Symptoms on DV316LEW
- ⚠️ Clothes not drying
- ⚠️ Dryer runs but no heat
- ⚠️ Long dry times
How to Fix Error hE on DV316LEW
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Test the heating element with a multimeter — replace if no continuity ($20–$80 part)
- 3 Check the thermal fuse — a blown fuse means there was overheating, also check the vent
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Nut driver
· Time: 30–60 min
Questions People Also Ask for Error hE
What does Samsung Dryer error code hE mean? ▼
Error code hE on a Samsung Dryer means: Heater error — no heat. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code hE? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error hE returns, the root cause (heater error — no heat) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code hE? ▼
It depends on the cause. Most hE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.