Samsung
DV316BGW
Dryer
Samsung DV316BGW — Error Code FE
Samsung DV316BGW error code FE: Frequency error — voltage issue.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Samsung Dryer error code FE guide →
Repair guidance: the symptoms and steps below come from the canonical Samsung Dryer FE guide and apply to DV316BGW unless your manual says otherwise.
Symptoms on DV316BGW
- ⚠️ Error code displayed
- ⚠️ Dryer not completing cycle
- ⚠️ Clothes still wet after full cycle
How to Fix Error FE on DV316BGW
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Non-contact voltage tester
· Time: 30–90 min
Questions People Also Ask for Error FE
What does Samsung Dryer error code FE mean? ▼
Error code FE on a Samsung Dryer means: Frequency error — voltage issue. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code FE? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error FE returns, the root cause (frequency error — voltage issue) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code FE? ▼
It depends on the cause. Most FE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.