Samsung
Dryer
⚠️ Stop Using
Samsung Dryer Error Code bC2
Samsung Dryer error code bC2: Control panel button stuck.
Should I unplug it?
⚠️ Stop using it
Stop using until the cause is identified. Check your owner's manual for model-specific guidance.
Can I fix it myself?
Technician Recommended
Part: See description above
How much will it cost?
DIY: Varies
Technician: $100–$500
⏱ 30–120 min
What Does Error bC2 Mean on Your Samsung Dryer?
Samsung Dryer error code bC2: Control panel button stuck.
What typically fails: See description above
What You're Probably Seeing
- → Error code displayed
- → Dryer not completing cycle
- → Clothes still wet after full cycle
What to Try First
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check all wiring harness connections to the main control board — reseat any loose connectors
- 3 If the board shows burn marks or damaged components, replacement is needed ($80–$300)
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Samsung Dryer error code bC2 mean? ▼
Error code bC2 on a Samsung Dryer means: Control panel button stuck. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code bC2? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error bC2 returns, the root cause (control panel button stuck) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code bC2? ▼
It depends on the cause. Most bC2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.