Samsung
Dishwasher
⛔ Unplug Now
Samsung Dishwasher Error Code LE
Samsung Dishwasher error code LE: Water leak detected in base.
Should I unplug it?
⛔ Yes — unplug now
Stop using immediately — water and electricity are dangerous. Unplug before inspecting.
Can I fix it myself?
Technician Recommended
Part: Door seal / inlet hose / drain hose / pump
How much will it cost?
DIY: $50–$200 (if hose/seal)
Technician: $150–$500
⏱ 30–120 min
What Does Error LE Mean on Your Samsung Dishwasher?
Samsung Dishwasher error code LE: Water leak detected in base.
What typically fails: Door seal / inlet hose / drain hose / pump
What You're Probably Seeing
- → Error code on display
- → Cycle not completing
- → Machine stopping unexpectedly
What to Try First
- 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Towels, Flashlight
· Time: 30–120 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Samsung Dishwasher error code LE mean? ▼
Error code LE on a Samsung Dishwasher means: Water leak detected in base. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dishwasher error code LE? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error LE returns, the root cause (water leak detected in base) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dishwasher with error code LE? ▼
It depends on the cause. Most LE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.