Samsung
Dishwasher
โ ๏ธ Stop Using
Samsung Dishwasher Error Code CE
Samsung Dishwasher error code CE: Communication error between control boards.
Should I unplug it?
โ ๏ธ Stop using it
Safe to leave powered off. Do not attempt to repair circuit boards without electronics experience.
Can I fix it myself?
Technician Recommended
Part: Control board / PCB
How much will it cost?
DIY: $80โ$300 (board replacement)
Technician: $200โ$600
โฑ 30โ90 min
What Does Error CE Mean on Your Samsung Dishwasher?
Samsung Dishwasher error code CE: Communication error between control boards.
What typically fails: Control board / PCB
What You're Probably Seeing
- โ Error code on display
- โ Cycle not completing
- โ Machine stopping unexpectedly
What to Try First
- 1 Unplug the dishwasher for 60 seconds then plug back in โ this resets the control board and clears many temporary faults
- 2 Check all wiring harness connections to the main control board โ reseat any loose connectors
- 3 If the board shows burn marks or damaged components, replacement is needed ($80โ$300)
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
๐ ๏ธ You'll need: Screwdriver set, Multimeter
ยท Time: 30โ90 min
๐ก Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Samsung Dishwasher error code CE mean? โผ
Error code CE on a Samsung Dishwasher means: Communication error between control boards. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dishwasher error code CE? โผ
First, unplug the dishwasher for 60 seconds to reset the control board. If error CE returns, the root cause (communication error between control boards) needs to be addressed โ check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dishwasher with error code CE? โผ
It depends on the cause. Most CE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.