🔍
Samsung Dishwasher ✅ Safe for Now

Samsung Dishwasher Error Code 4E

Samsung Dishwasher error code 4E: Water not filling — check supply valve.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
✅ No — safe for now
Safe — unit stops when it can't fill. Check the supply hose and valve before calling a technician.
Can I fix it myself?
DIY Possible
Part: Water inlet valve / supply hose
How much will it cost?
DIY: $15–$80 (inlet valve)
Technician: $100–$250
⏱ 20–40 min

What Does Error 4E Mean on Your Samsung Dishwasher?

Samsung Dishwasher error code 4E: Water not filling — check supply valve.

What typically fails: Water inlet valve / supply hose

What You're Probably Seeing

How to Fix It Yourself

  1. 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check that the water supply valve behind the machine is fully open
  3. 3 Inspect the inlet hose screen filter — sediment often blocks it (unscrew hose, clean mesh screen)
  4. 4 Test the water inlet valve with a multimeter — replace if no continuity ($15–$80 part)
  5. 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Pliers, Multimeter · Time: 20–40 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Dishwasher error code 4E mean? ▼
Error code 4E on a Samsung Dishwasher means: Water not filling — check supply valve. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dishwasher error code 4E? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error 4E returns, the root cause (water not filling — check supply valve) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dishwasher with error code 4E? ▼
It depends on the cause. Most 4E errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Dishwasher Codes

All Samsung dishwasher error codes → All Samsung appliance codes →

Was this page helpful?

Rate the helpfulness of this page