Maytag
MAV6200AWW
Washing Machine
Maytag MAV6200AWW — Error Code Sud
Maytag MAV6200AWW error code Sud: Excess suds detected — too much detergent.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Maytag Washing Machine error code Sud guide →
Repair guidance: the symptoms and steps below come from the canonical Maytag Washing Machine Sud guide and apply to MAV6200AWW unless your manual says otherwise.
Symptoms on MAV6200AWW
- ⚠️ Excessive suds in drum
- ⚠️ Cycle extending or repeating
- ⚠️ Clothes not clean
How to Fix Error Sud on MAV6200AWW
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
Questions People Also Ask for Error Sud
What does Maytag Washing Machine error code Sud mean? ▼
Error code Sud on a Maytag Washing Machine means: Excess suds detected — too much detergent. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Maytag Washing Machine error code Sud? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error Sud returns, the root cause (excess suds detected — too much detergent) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Maytag Washing Machine with error code Sud? ▼
It depends on the cause. Most Sud errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.