🔍
Maytag Washing Machine ⚠️ Stop Using

Maytag Washing Machine Error Code F6E2

Maytag Washing Machine error code F6E2: Communication error (MCU to CCU).

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
⚠️ Stop using it
Safe to leave powered off. Do not attempt to repair circuit boards without electronics experience.
Can I fix it myself?
Technician Recommended
Part: Control board / PCB
How much will it cost?
DIY: $80–$300 (board replacement)
Technician: $200–$600
⏱ 30–90 min

What Does Error F6E2 Mean on Your Maytag Washing Machine?

Maytag Washing Machine error code F6E2: Communication error (MCU to CCU).

What typically fails: Control board / PCB

What You're Probably Seeing

What to Try First

  1. 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check all wiring harness connections to the main control board — reseat any loose connectors
  3. 3 If the board shows burn marks or damaged components, replacement is needed ($80–$300)
  4. 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Multimeter · Time: 30–90 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Maytag Washing Machine error code F6E2 mean? ▼
Error code F6E2 on a Maytag Washing Machine means: Communication error (MCU to CCU). The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Maytag Washing Machine error code F6E2? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error F6E2 returns, the root cause (communication error (mcu to ccu)) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Maytag Washing Machine with error code F6E2? ▼
It depends on the cause. Most F6E2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Maytag Washing Machine Codes

All Maytag washing machine error codes → All Maytag appliance codes →

Was this page helpful?

Rate the helpfulness of this page