Maytag
Washing Machine
✅ Safe for Now
Maytag Washing Machine Error Code F5E1
Maytag Washing Machine error code F5E1: Door switch failure.
Should I unplug it?
✅ No — safe for now
Safe — unit won't run with door open. A common and inexpensive fix.
Can I fix it myself?
DIY Possible
Part: Door latch / door lock assembly
How much will it cost?
DIY: $20–$100 (latch assembly)
Technician: $80–$200
⏱ 15–30 min
What Does Error F5E1 Mean on Your Maytag Washing Machine?
Maytag Washing Machine error code F5E1: Door switch failure.
What typically fails: Door latch / door lock assembly
What You're Probably Seeing
- → Cycle won't start
- → Door won't open after cycle
- → Error code on display
How to Fix It Yourself
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check door seal for debris or warping preventing full closure
- 3 Test the door latch mechanism — if it clicks but machine won't start, the switch is faulty
- 4 Replace the door lock assembly ($25–$80 part, 15–30 min DIY)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Putty knife
· Time: 15–30 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Maytag Washing Machine error code F5E1 mean? ▼
Error code F5E1 on a Maytag Washing Machine means: Door switch failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Maytag Washing Machine error code F5E1? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error F5E1 returns, the root cause (door switch failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Maytag Washing Machine with error code F5E1? ▼
It depends on the cause. Most F5E1 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.