LG
Washing Machine
⚠️ Stop Using
LG Washing Machine Error Code Lr
LG Washing Machine error code Lr: Rotor position sensor error.
Should I unplug it?
⚠️ Stop using it
Caution — continued use without airflow causes overheating. Turn off until repaired.
Can I fix it myself?
Technician Recommended
Part: Fan motor / run capacitor
How much will it cost?
DIY: $30–$200 (motor or capacitor)
Technician: $150–$500
⏱ 45–90 min
What Does Error Lr Mean on Your LG Washing Machine?
LG Washing Machine error code Lr: Rotor position sensor error.
What typically fails: Fan motor / run capacitor
What You're Probably Seeing
- → Error code displayed
- → Machine stops mid-cycle
- → Cycle won't complete
What to Try First
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Test the sensor with a multimeter — check resistance against the spec in the service manual
- 3 Inspect the sensor's wiring harness for corrosion or loose connector
- 4 Replace the sensor if out of spec ($10–$50 part)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester
· Time: 45–90 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does LG Washing Machine error code Lr mean? ▼
Error code Lr on a LG Washing Machine means: Rotor position sensor error. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix LG Washing Machine error code Lr? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error Lr returns, the root cause (rotor position sensor error) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my LG Washing Machine with error code Lr? ▼
It depends on the cause. Most Lr errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.