πŸ”
LG FM1BM22FBI Refrigerator

LG FM1BM22FBI β€” Error Code Er FS

LG FM1BM22FBI error code Er FS: Freezer sensor failure.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Looking for the full diagnosis and repair guide? View complete LG Refrigerator error code Er FS guide β†’

Repair guidance: the symptoms and steps below come from the canonical LG Refrigerator Er FS guide and apply to FM1BM22FBI unless your manual says otherwise.

Symptoms on FM1BM22FBI

How to Fix Error Er FS on FM1BM22FBI

  1. 1 Unplug the refrigerator for 60 seconds then plug back in β€” this resets the control board and clears many temporary faults
  2. 2 Test the sensor with a multimeter β€” check resistance against the spec in the service manual
  3. 3 Inspect the sensor's wiring harness for corrosion or loose connector
  4. 4 Replace the sensor if out of spec ($10–$50 part)
  5. 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
πŸ› οΈ You'll need: Multimeter, Screwdriver set Β· Time: 20–45 min

Questions People Also Ask for Error Er FS

What does LG Refrigerator error code Er FS mean? β–Ό
Error code Er FS on a LG Refrigerator means: Freezer sensor failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix LG Refrigerator error code Er FS? β–Ό
First, unplug the refrigerator for 60 seconds to reset the control board. If error Er FS returns, the root cause (freezer sensor failure) needs to be addressed β€” check connections, filters, and hoses before calling a technician.
Is it safe to use my LG Refrigerator with error code Er FS? β–Ό
It depends on the cause. Most Er FS errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More for this Model