LG
WKGX201H*A
Dryer
LG WKGX201H*A — Error Code d90
LG WKGX201H*A error code d90: Exhaust duct 90% blocked — must clean now.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete LG Dryer error code d90 guide →
Repair guidance: the symptoms and steps below come from the canonical LG Dryer d90 guide and apply to WKGX201H*A unless your manual says otherwise.
Symptoms on WKGX201H*A
- ⚠️ Dryer won't start
- ⚠️ Door won't open after cycle
How to Fix Error d90 on WKGX201H*A
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check door seal for debris or warping preventing full closure
- 3 Test the door latch mechanism — if it clicks but machine won't start, the switch is faulty
- 4 Replace the door lock assembly ($25–$80 part, 15–30 min DIY)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Putty knife
· Time: 15–30 min
Questions People Also Ask for Error d90
What does LG Dryer error code d90 mean? ▼
Error code d90 on a LG Dryer means: Exhaust duct 90% blocked — must clean now. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix LG Dryer error code d90? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error d90 returns, the root cause (exhaust duct 90% blocked — must clean now) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my LG Dryer with error code d90? ▼
It depends on the cause. Most d90 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.