LG Dryer ✅ Safe for Now

LG Dryer Error Code TE2

Q: "What does LG Dryer error code TE2 mean?"

"Error code TE2 on a LG Dryer means: Thermistor failure (outlet). The appliance detected this condition and has stopped or limited operation to prevent further damage."

Q: "How do I fix LG Dryer error code TE2?"

"First, unplug the dryer for 60 seconds to reset the control board. If error TE2 returns, the root cause (thermistor failure (outlet)) needs to be addressed — check connections, filters, and hoses before calling a technician."

Q: "Is it safe to use my LG Dryer with error code TE2?"

"It depends on the cause. Most TE2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error."

LG Dryer error code TE2: Thermistor failure (outlet).

Should I unplug it?

✅ No — safe for now

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Can I fix it myself?

DIY Possible

Part: Heating element / thermal fuse / thermistor

How much will it cost?

DIY: $20–$100 (element or thermistor)

Technician: $100–$300

⏱ 30–60 min

What Does Error TE2 Mean on Your LG Dryer?

LG Dryer error code TE2: Thermistor failure (outlet).

What typically fails: Heating element / thermal fuse / thermistor

What You're Probably Seeing

→ Clothes not drying
→ Dryer runs but no heat
→ Long dry times

What to Try First

1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Test the sensor with a multimeter — check resistance against the spec in the service manual
3 Inspect the sensor's wiring harness for corrosion or loose connector
4 Replace the sensor if out of spec ($10–$50 part)
5 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does LG Dryer error code TE2 mean? ▼

Error code TE2 on a LG Dryer means: Thermistor failure (outlet). The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix LG Dryer error code TE2? ▼

First, unplug the dryer for 60 seconds to reset the control board. If error TE2 returns, the root cause (thermistor failure (outlet)) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my LG Dryer with error code TE2? ▼

It depends on the cause. Most TE2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More LG Dryer Codes

All LG dryer error codes → All LG appliance codes →