LG Dryer ✅ Safe for Now

LG Dryer Error Code tCL

LG Dryer error code tCL: Tub clean reminder.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Lg dryer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

LG Support - Dryer troubleshooting — Official LG support library used for dryer error-code and troubleshooting references.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

This is not a malfunction — it's an active mode or reminder. No repair needed.

Can I fix it myself?

No Repair Needed

Part: User setting / mode

How much will it cost?

DIY: $0

Technician: N/A

⏱ 1 min

What Does Error tCL Mean on Your LG Dryer?

LG Dryer error code tCL: Tub clean reminder.

What typically fails: User setting / mode

What You're Probably Seeing

→ Error code displayed
→ Dryer not completing cycle
→ Clothes still wet after full cycle

Common Causes

• Door switch not reporting closed
• Door strike or latch misaligned
• Loose door-switch wiring or failed switch

How to Fix It Yourself

1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does LG Dryer error code tCL mean? ▼

Error code tCL on a LG Dryer means: Tub clean reminder. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix LG Dryer error code tCL? ▼

First, unplug the dryer for 60 seconds to reset the control board. If error tCL returns, the root cause (tub clean reminder) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my LG Dryer with error code tCL? ▼

It depends on the cause. Most tCL errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More LG Dryer Codes

All LG dryer error codes → All LG appliance codes →