LG
DLGY1702*E
Dryer
LG DLGY1702*E — Error Code nP
LG DLGY1702*E error code nP: No power to dryer (cord / breaker).
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete LG Dryer error code nP guide →
Repair guidance: the symptoms and steps below come from the canonical LG Dryer nP guide and apply to DLGY1702*E unless your manual says otherwise.
Symptoms on DLGY1702*E
- ⚠️ Error code displayed
- ⚠️ Dryer not completing cycle
- ⚠️ Clothes still wet after full cycle
How to Fix Error nP on DLGY1702*E
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
Questions People Also Ask for Error nP
What does LG Dryer error code nP mean? ▼
Error code nP on a LG Dryer means: No power to dryer (cord / breaker). The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix LG Dryer error code nP? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error nP returns, the root cause (no power to dryer (cord / breaker)) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my LG Dryer with error code nP? ▼
It depends on the cause. Most nP errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.