πŸ”
LG Dryer DLEX0001TM (ASTEEUS)

LG DLEX0001TM (ASTEEUS) Error Codes

All error codes for LG DLEX0001TM (ASTEEUS) dryer with diagnoses and fixes.

Last reviewed: Last updated:

Methodology: Reviewed as an LG dryer model hub. We use LG model-support and owner-manual guidance to frame safe dryer checks, then route specific display codes to their code-level diagnostic pages when available.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What this model hub covers

Use this LG DLEX0001TM (ASTEEUS) hub to match the displayed code to the right model-specific guide before replacing parts.

Match the symptom first

  • β€’ Dryer displays a code and pauses, shuts down, or will not start a cycle
  • β€’ Clothes remain damp, drying time increases, or airflow warning appears
  • β€’ Drum turns but heat is weak, intermittent, or absent

Safe first checks

  • β†’ Confirm the complete model and suffix from the rating label before comparing parts or manuals
  • β†’ Clean the lint filter and inspect the exhaust vent path before replacing sensors or boards
  • β†’ Reset power once for 60 seconds, then run a short timed-dry test if there is no burning smell or visible damage

Safety boundary

Disconnect power before inspection. For gas dryers, stop if you smell gas and use a qualified technician.

D80
LG DLEX0001TM (ASTEEUS) error code d80: Exhaust duct 80% blocked β€” clean lint.
D90
LG DLEX0001TM (ASTEEUS) error code d90: Exhaust duct 90% blocked β€” must clean now.
D95
LG DLEX0001TM (ASTEEUS) error code d95: Exhaust duct 95% blocked β€” fire risk.
E1
LG DLEX0001TM (ASTEEUS) error code E1: Exhaust thermistor open circuit.
E2
LG DLEX0001TM (ASTEEUS) error code E2: Exhaust thermistor short circuit.
NP
LG DLEX0001TM (ASTEEUS) error code nP: No power to dryer (cord / breaker).
PS
LG DLEX0001TM (ASTEEUS) error code PS: Power supply failure.
TE1
LG DLEX0001TM (ASTEEUS) error code TE1: Thermistor failure (inlet).
TE2
LG DLEX0001TM (ASTEEUS) error code TE2: Thermistor failure (outlet).
TE4
LG DLEX0001TM (ASTEEUS) error code TE4: Thermistor failure (4th sensor).
TE5
LG DLEX0001TM (ASTEEUS) error code tE5: Thermistor failure (5th sensor).

Related LG Dryer model guides

If the suffix or panel layout does not match, check a nearby reviewed model guide.

150 nearby guides

Common LG Dryer codes

Use the generic code page when the symptom matches but the exact model-specific code page is missing.

16 generic guides

Was this page helpful?

Rate the helpfulness of this page