LG
Dishwasher
✅ Safe for Now
LG Dishwasher Error Code IE
LG Dishwasher error code IE: No water supply — check inlet valve.
Should I unplug it?
✅ No — safe for now
Safe — unit stops when it can't fill. Check the supply hose and valve before calling a technician.
Can I fix it myself?
DIY Possible
Part: Water inlet valve / supply hose
How much will it cost?
DIY: $15–$80 (inlet valve)
Technician: $100–$250
⏱ 20–40 min
What Does Error IE Mean on Your LG Dishwasher?
LG Dishwasher error code IE: No water supply — check inlet valve.
What typically fails: Water inlet valve / supply hose
What You're Probably Seeing
- → Dishwasher not filling
- → Dishes coming out dirty
- → Machine stops mid-cycle
How to Fix It Yourself
- 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check that the water supply valve behind the machine is fully open
- 3 Inspect the inlet hose screen filter — sediment often blocks it (unscrew hose, clean mesh screen)
- 4 Test the water inlet valve with a multimeter — replace if no continuity ($15–$80 part)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Pliers, Multimeter
· Time: 20–40 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does LG Dishwasher error code IE mean? ▼
Error code IE on a LG Dishwasher means: No water supply — check inlet valve. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix LG Dishwasher error code IE? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error IE returns, the root cause (no water supply — check inlet valve) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my LG Dishwasher with error code IE? ▼
It depends on the cause. Most IE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.