🔍
LG Dishwasher ⚠️ Stop Using

LG Dishwasher Error Code CE

LG Dishwasher error code CE: Motor current too high.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
⚠️ Stop using it
Caution — continued use without airflow causes overheating. Turn off until repaired.
Can I fix it myself?
Technician Recommended
Part: Fan motor / run capacitor
How much will it cost?
DIY: $30–$200 (motor or capacitor)
Technician: $150–$500
⏱ 45–90 min

What Does Error CE Mean on Your LG Dishwasher?

LG Dishwasher error code CE: Motor current too high.

What typically fails: Fan motor / run capacitor

What You're Probably Seeing

What to Try First

  1. 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
  3. 3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
  4. 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester · Time: 45–90 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does LG Dishwasher error code CE mean? ▼
Error code CE on a LG Dishwasher means: Motor current too high. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix LG Dishwasher error code CE? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error CE returns, the root cause (motor current too high) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my LG Dishwasher with error code CE? ▼
It depends on the cause. Most CE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More LG Dishwasher Codes

All LG dishwasher error codes → All LG appliance codes →

Was this page helpful?

Rate the helpfulness of this page