GE
GTW490BMR***
Washing Machine
GE GTW490BMR*** — Error Code E8
GE GTW490BMR*** error code E8: Motor control unit error.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete GE Washing Machine error code E8 guide →
Repair guidance: the symptoms and steps below come from the canonical GE Washing Machine E8 guide and apply to GTW490BMR*** unless your manual says otherwise.
Symptoms on GTW490BMR***
- ⚠️ Drum not spinning
- ⚠️ Loud noise during spin
- ⚠️ Machine vibrating excessively
How to Fix Error E8 on GTW490BMR***
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check all wiring harness connections to the main control board — reseat any loose connectors
- 3 If the board shows burn marks or damaged components, replacement is needed ($80–$300)
- 4 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
- 5 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester
· Time: 45–90 min
Questions People Also Ask for Error E8
What does GE Washing Machine error code E8 mean? ▼
Error code E8 on a GE Washing Machine means: Motor control unit error. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix GE Washing Machine error code E8? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E8 returns, the root cause (motor control unit error) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my GE Washing Machine with error code E8? ▼
It depends on the cause. Most E8 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.