GE
Washing Machine
⚠️ Stop Using
GE Washing Machine Error Code E6
GE Washing Machine error code E6: Motor error.
Should I unplug it?
⚠️ Stop using it
Caution — continued use without airflow causes overheating. Turn off until repaired.
Can I fix it myself?
Technician Recommended
Part: Fan motor / run capacitor
How much will it cost?
DIY: $30–$200 (motor or capacitor)
Technician: $150–$500
⏱ 45–90 min
What Does Error E6 Mean on Your GE Washing Machine?
GE Washing Machine error code E6: Motor error.
What typically fails: Fan motor / run capacitor
What You're Probably Seeing
- → Drum not spinning
- → Loud noise during spin
- → Machine vibrating excessively
What to Try First
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
- 3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester
· Time: 45–90 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does GE Washing Machine error code E6 mean? ▼
Error code E6 on a GE Washing Machine means: Motor error. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix GE Washing Machine error code E6? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E6 returns, the root cause (motor error) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my GE Washing Machine with error code E6? ▼
It depends on the cause. Most E6 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.