GE
Dryer
⚠️ Stop Using
GE Dryer Error Code PF
GE Dryer error code PF: Power failure during cycle.
Should I unplug it?
⚠️ Stop using it
Stop using until the cause is identified. Check your owner's manual for model-specific guidance.
Can I fix it myself?
Technician Recommended
Part: See description above
How much will it cost?
DIY: Varies
Technician: $100–$500
⏱ 30–120 min
What Does Error PF Mean on Your GE Dryer?
GE Dryer error code PF: Power failure during cycle.
What typically fails: See description above
What You're Probably Seeing
- → Error code displayed
- → Dryer not completing cycle
- → Clothes still wet after full cycle
What to Try First
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does GE Dryer error code PF mean? ▼
Error code PF on a GE Dryer means: Power failure during cycle. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix GE Dryer error code PF? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error PF returns, the root cause (power failure during cycle) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my GE Dryer with error code PF? ▼
It depends on the cause. Most PF errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.