Frigidaire
GLWS1349AS1
Washing Machine
Frigidaire GLWS1349AS1 — Error Code E74
Frigidaire GLWS1349AS1 error code E74: Wash NTC temperature drop.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E74 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E74 guide and apply to GLWS1349AS1 unless your manual says otherwise.
Symptoms on GLWS1349AS1
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error E74 on GLWS1349AS1
- 1 Cancel the cycle and avoid another sanitize or hot wash until the fault is checked
- 2 Unplug the washer and inspect the wash NTC sensor connector and heater wiring for a loose or wet connection
- 3 Compare the sensor resistance to the Frigidaire service specification for your model
- 4 Check that the incoming hot-water supply is open if your model relies on it for warm cycles
- 5 If E74 persists after the sensor and wiring test good, arrange service for the heater circuit
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 20–45 min
Questions People Also Ask for Error E74
What does Frigidaire Washing Machine error code E74 mean? ▼
Error code E74 on a Frigidaire Washing Machine means: Wash NTC temperature drop. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E74? ▼
Start by checking the wash temperature sensor and heater wiring with power removed. If the sensor reads correctly and the hot-water supply is normal, the heater circuit may need service.
Is it safe to use my Frigidaire Washing Machine with error code E74? ▼
Avoid repeated hot cycles until the temperature-sensing problem is fixed. The washer may wash poorly or stop mid-cycle.