Frigidaire
GLWS1349AS1
Washing Machine
Frigidaire GLWS1349AS1 — Error Code E59
Frigidaire GLWS1349AS1 error code E59: No tachometer signal for 3 seconds.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E59 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E59 guide and apply to GLWS1349AS1 unless your manual says otherwise.
Symptoms on GLWS1349AS1
- ⚠️ Drum will not spin up
- ⚠️ Washer stops during tumble or spin
- ⚠️ Burning-rubber smell if the belt slips
How to Fix Error E59 on GLWS1349AS1
- 1 Pause the cycle and remove part of the load if the basket is overloaded
- 2 Unplug the washer and inspect the drive belt, motor pulley, and tachometer connector for damage or slipping
- 3 Check for debris between the inner basket and outer tub that can keep the motor from reaching speed
- 4 Restore power only after the drum turns freely by hand
- 5 If E59 comes back on an empty test cycle, book service for the motor or speed-sensing circuit
🛠️ You'll need: Screwdriver set, Multimeter
· Time: 30–90 min
Questions People Also Ask for Error E59
What does Frigidaire Washing Machine error code E59 mean? ▼
Error code E59 on a Frigidaire Washing Machine means: No tachometer signal for 3 seconds. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E59? ▼
Start by reducing the load and checking the belt and motor-speed wiring with the washer unplugged. If E59 returns on an empty cycle, the tachometer or motor circuit likely needs service.
Is it safe to use my Frigidaire Washing Machine with error code E59? ▼
No. Keep the washer off until the spin system is checked because repeated restart attempts can overheat the motor or belt.