Frigidaire
GLTR1670AS0
Washing Machine
Frigidaire GLTR1670AS0 — Error Code E71
Frigidaire GLTR1670AS0 error code E71: NTC sensor in wash circuit failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E71 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E71 guide and apply to GLTR1670AS0 unless your manual says otherwise.
Symptoms on GLTR1670AS0
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error E71 on GLTR1670AS0
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Test the sensor with a multimeter — check resistance against the spec in the service manual
- 3 Inspect the sensor's wiring harness for corrosion or loose connector
- 4 Replace the sensor if out of spec ($10–$50 part)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 20–45 min
Questions People Also Ask for Error E71
What does Frigidaire Washing Machine error code E71 mean? ▼
Error code E71 on a Frigidaire Washing Machine means: NTC sensor in wash circuit failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E71? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E71 returns, the root cause (ntc sensor in wash circuit failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E71? ▼
It depends on the cause. Most E71 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.