Frigidaire
GLTF2940FS0
Washing Machine
Frigidaire GLTF2940FS0 — Error Code E35
Frigidaire GLTF2940FS0 error code E35: Water pressure too high (overfill).
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E35 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E35 guide and apply to GLTF2940FS0 unless your manual says otherwise.
Symptoms on GLTF2940FS0
- ⚠️ Water level rises higher than normal
- ⚠️ Washer may keep filling or pause the cycle
- ⚠️ Overfill alarm or drain sequence starts
How to Fix Error E35 on GLTF2940FS0
- 1 Press cancel to stop the fill, then shut off both water supply valves right away
- 2 Unplug the washer and make sure water stops entering the tub; if it does not, the inlet valve may be stuck open
- 3 Inspect the pressure switch hose or air trap for soap residue, pinches, or a loose connection
- 4 Run a clean cycle if heavy detergent buildup may be trapping pressure in the air chamber
- 5 Leave the washer off until the inlet valve or pressure sensor problem is fixed
🛠️ You'll need: Screwdriver set, Pliers, Multimeter
· Time: 20–40 min
Questions People Also Ask for Error E35
What does Frigidaire Washing Machine error code E35 mean? ▼
Error code E35 on a Frigidaire Washing Machine means: Water pressure too high (overfill). The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E35? ▼
Start by stopping the fill and shutting off the water valves. Then inspect the inlet valve and pressure hose because E35 usually means the washer thinks the water level is too high or is still rising.
Is it safe to use my Frigidaire Washing Machine with error code E35? ▼
No. Leave the washer off if it keeps filling or if the tub level is higher than normal.