Frigidaire
GLTF2940ES3
Washing Machine
Frigidaire GLTF2940ES3 — Error Code E52
Frigidaire GLTF2940ES3 error code E52: Bad signal from tachometer (motor speed sensor).
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E52 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E52 guide and apply to GLTF2940ES3 unless your manual says otherwise.
Symptoms on GLTF2940ES3
- ⚠️ Drum not spinning
- ⚠️ Loud noise during spin
- ⚠️ Machine vibrating excessively
How to Fix Error E52 on GLTF2940ES3
- 1 Pause the cycle and remove part of the load if the drum is packed tightly or out of balance
- 2 Unplug the washer and inspect the belt, motor pulley, and tachometer wiring for damage or a loose connector
- 3 Clear any fabric caught between the tub and basket that could stall the motor
- 4 Replace the tachometer or motor only after confirming the wiring and belt are sound
- 5 If the drum still will not reach spin speed, schedule service for the motor control circuit
🛠️ You'll need: Screwdriver set, Multimeter
· Time: 30–90 min
Questions People Also Ask for Error E52
What does Frigidaire Washing Machine error code E52 mean? ▼
Error code E52 on a Frigidaire Washing Machine means: Bad signal from tachometer (motor speed sensor). The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E52? ▼
Start by reducing the load and checking the belt, motor pulley, and tachometer wiring with the washer unplugged. If E52 returns on an empty test cycle, the speed-sensing circuit or motor likely needs service.
Is it safe to use my Frigidaire Washing Machine with error code E52? ▼
Do not keep trying to spin the washer until the motor-speed fault is fixed. Repeated restart attempts can damage the motor or belt.