Frigidaire
GLTF2940ES3
Washing Machine
Frigidaire GLTF2940ES3 — Error Code E47
Frigidaire GLTF2940ES3 error code E47: Door lock overcurrent.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E47 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E47 guide and apply to GLTF2940ES3 unless your manual says otherwise.
Symptoms on GLTF2940ES3
- ⚠️ Cycle won't start
- ⚠️ Door won't open after cycle
- ⚠️ Error code on display
How to Fix Error E47 on GLTF2940ES3
- 1 Press pause and make sure the door is fully closed with no item caught in the seal
- 2 Inspect the door strike and latch opening for cracks, detergent buildup, or a warped boot
- 3 Unplug the washer and check the lock harness for chafing or heat damage
- 4 If E47 returns after the door hardware checks out, leave the washer unplugged and have the lock circuit tested
- 5 Do not force the latch or tape the switch closed
🛠️ You'll need: Screwdriver set, Putty knife
· Time: 15–30 min
Questions People Also Ask for Error E47
What does Frigidaire Washing Machine error code E47 mean? ▼
Error code E47 on a Frigidaire Washing Machine means: Door lock overcurrent. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E47? ▼
Start by checking the door strike, latch, and harness for binding or heat damage. If the hardware looks normal but the code returns, the door-lock circuit needs service.
Is it safe to use my Frigidaire Washing Machine with error code E47? ▼
No. Door-lock overcurrent can overheat the latch assembly, so keep the washer off until the circuit is checked.