Frigidaire
GLTF1040AS0
Washing Machine
Frigidaire GLTF1040AS0 — Error Code E71
Frigidaire GLTF1040AS0 error code E71: NTC sensor in wash circuit failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E71 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E71 guide and apply to GLTF1040AS0 unless your manual says otherwise.
Symptoms on GLTF1040AS0
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error E71 on GLTF1040AS0
- 1 Cancel the cycle and switch the washer off before testing another warm or sanitize cycle
- 2 Unplug the washer and inspect the wash NTC connector and wiring for corrosion, broken insulation, or a loose fit
- 3 Check the sensor resistance against the Frigidaire service data for your model
- 4 Replace the NTC sensor if readings are clearly out of range or intermittent
- 5 If the sensor and wiring check out, have the heater control circuit inspected professionally
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 20–45 min
Questions People Also Ask for Error E71
What does Frigidaire Washing Machine error code E71 mean? ▼
Error code E71 on a Frigidaire Washing Machine means: NTC sensor in wash circuit failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E71? ▼
Start by unplugging the washer and checking the wash NTC sensor and harness. If the sensor reads out of range or the wiring is damaged, repair that fault before running another heated cycle.
Is it safe to use my Frigidaire Washing Machine with error code E71? ▼
Avoid repeated hot cycles until the sensor fault is fixed. Incorrect temperature readings can overheat or underheat the wash.