Frigidaire
FWT449GFS1
Washing Machine
Frigidaire FWT449GFS1 — Error Code E5C
Frigidaire FWT449GFS1 error code E5C: Heater relay failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E5C guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E5C guide and apply to FWT449GFS1 unless your manual says otherwise.
Symptoms on FWT449GFS1
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error E5C on FWT449GFS1
- 1 Stop the cycle and switch to cold wash only until the heater circuit is checked
- 2 Unplug the washer and inspect the heater harness for loose or scorched terminals
- 3 Confirm the heating element is not shorted before replacing any control parts
- 4 If E5C returns after wiring and heater checks, arrange service for the heater relay or board
- 5 Do not jumper the heater relay to force heating
🛠️ You'll need: Multimeter, Screwdriver set, Nut driver
· Time: 30–60 min
Questions People Also Ask for Error E5C
What does Frigidaire Washing Machine error code E5C mean? ▼
Error code E5C on a Frigidaire Washing Machine means: Heater relay failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E5C? ▼
Start by using cold-only cycles and checking the heater and wiring with power removed. If the heating element tests good and E5C returns, the heater relay or board circuit needs service.
Is it safe to use my Frigidaire Washing Machine with error code E5C? ▼
Cold-only cycles are usually acceptable short term. Avoid heated cycles until the heater relay fault is repaired.