Frigidaire
FTFB4000FS1
Washing Machine
Frigidaire FTFB4000FS1 — Error Code E58
Frigidaire FTFB4000FS1 error code E58: Motor overcurrent — high current phase.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E58 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E58 guide and apply to FTFB4000FS1 unless your manual says otherwise.
Symptoms on FTFB4000FS1
- ⚠️ Drum not spinning
- ⚠️ Loud noise during spin
- ⚠️ Machine vibrating excessively
How to Fix Error E58 on FTFB4000FS1
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
- 3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester
· Time: 45–90 min
Questions People Also Ask for Error E58
What does Frigidaire Washing Machine error code E58 mean? ▼
Error code E58 on a Frigidaire Washing Machine means: Motor overcurrent — high current phase. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E58? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E58 returns, the root cause (motor overcurrent — high current phase) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E58? ▼
It depends on the cause. Most E58 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.