Frigidaire
FTFB4000FS1
Washing Machine
Frigidaire FTFB4000FS1 — Error Code E45
Frigidaire FTFB4000FS1 error code E45: Door lock relay failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E45 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E45 guide and apply to FTFB4000FS1 unless your manual says otherwise.
Symptoms on FTFB4000FS1
- ⚠️ Cycle won't start
- ⚠️ Door won't open after cycle
- ⚠️ Error code on display
How to Fix Error E45 on FTFB4000FS1
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check door seal for debris or warping preventing full closure
- 3 Test the door latch mechanism — if it clicks but machine won't start, the switch is faulty
- 4 Replace the door lock assembly ($25–$80 part, 15–30 min DIY)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Putty knife
· Time: 15–30 min
Questions People Also Ask for Error E45
What does Frigidaire Washing Machine error code E45 mean? ▼
Error code E45 on a Frigidaire Washing Machine means: Door lock relay failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E45? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E45 returns, the root cause (door lock relay failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E45? ▼
It depends on the cause. Most E45 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.