Frigidaire
FTF2140ES0
Washing Machine
Frigidaire FTF2140ES0 — Error Code E57
Frigidaire FTF2140ES0 error code E57: Inverter motor overcurrent.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E57 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E57 guide and apply to FTF2140ES0 unless your manual says otherwise.
Symptoms on FTF2140ES0
- ⚠️ Drum not spinning
- ⚠️ Loud noise during spin
- ⚠️ Machine vibrating excessively
How to Fix Error E57 on FTF2140ES0
- 1 Stop the cycle and remove part of the load if the basket is tightly packed
- 2 Unplug the washer and check that the drum turns freely and the belt is not jammed or shredded
- 3 Inspect the inverter motor wiring and connector for heat damage or rubbing against the cabinet
- 4 If the breaker trips or E57 returns on an empty cycle, leave the washer off and have the motor control checked professionally
- 5 Do not keep restarting a washer that cannot reach spin speed
🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester
· Time: 45–90 min
Questions People Also Ask for Error E57
What does Frigidaire Washing Machine error code E57 mean? ▼
Error code E57 on a Frigidaire Washing Machine means: Inverter motor overcurrent. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E57? ▼
Start by reducing the load and checking the belt, drum movement, and motor harness with power removed. If E57 returns on an empty cycle, the inverter motor circuit needs professional service.
Is it safe to use my Frigidaire Washing Machine with error code E57? ▼
No. Leave the washer off until the motor path is checked because overcurrent can overheat wiring and control parts.