Frigidaire
Washing Machine
✅ Safe for Now
Frigidaire Washing Machine Error Code E42
Frigidaire Washing Machine error code E42: Door latch failure.
Should I unplug it?
✅ No — safe for now
Safe — unit won't run with door open. A common and inexpensive fix.
Can I fix it myself?
DIY Possible
Part: Door latch / door lock assembly
How much will it cost?
DIY: $20–$100 (latch assembly)
Technician: $80–$200
⏱ 15–30 min
What Does Error E42 Mean on Your Frigidaire Washing Machine?
Frigidaire Washing Machine error code E42: Door latch failure.
What typically fails: Door latch / door lock assembly
What You're Probably Seeing
- → Cycle won't start
- → Door won't open after cycle
- → Error code on display
How to Fix It Yourself
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check door seal for debris or warping preventing full closure
- 3 Test the door latch mechanism — if it clicks but machine won't start, the switch is faulty
- 4 Replace the door lock assembly ($25–$80 part, 15–30 min DIY)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Putty knife
· Time: 15–30 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Frigidaire Washing Machine error code E42 mean? ▼
Error code E42 on a Frigidaire Washing Machine means: Door latch failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E42? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E42 returns, the root cause (door latch failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E42? ▼
It depends on the cause. Most E42 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.