Frigidaire
GRSS2352A*
Refrigerator
Frigidaire GRSS2352A* — Error Code E71
Frigidaire GRSS2352A* error code E71: NTC sensor in wash circuit failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Refrigerator error code E71 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Refrigerator E71 guide and apply to GRSS2352A* unless your manual says otherwise.
Symptoms on GRSS2352A*
- ⚠️ Temperatures swing or become inaccurate despite normal compressor operation
- ⚠️ The refrigerator may overcool, undercool, or alarm unexpectedly
- ⚠️ The code returns after a reset without any obvious airflow blockage
How to Fix Error E71 on GRSS2352A*
- 1 Unplug the refrigerator before opening covers or disconnecting sensors
- 2 Inspect accessible thermistor wiring for corrosion, moisture, or damaged insulation
- 3 Confirm vents are clear so the sensor is reading actual compartment temperature
- 4 Replace the failed thermistor or schedule service if readings remain unstable
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 20–45 min