Frigidaire
FRTE1930AV
Refrigerator
Frigidaire FRTE1930AV — Error Code E24
Frigidaire FRTE1930AV error code E24: Drain pump relay failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Refrigerator error code E24 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Refrigerator E24 guide and apply to FRTE1930AV unless your manual says otherwise.
Symptoms on FRTE1930AV
- ⚠️ Water appears under the refrigerator or inside the fresh-food section
- ⚠️ Drain noises repeat without clearing the issue
- ⚠️ Frost or ice returns after a short period of normal operation
How to Fix Error E24 on FRTE1930AV
- 1 Unplug the refrigerator and clear any ice or debris from the drain opening and tube
- 2 Check whether your model uses a small condensate pump and inspect its connector
- 3 Confirm the rear drain pan is seated correctly and not overflowing
- 4 Contact a technician if the code returns after the drain path is fully clear
🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum
· Time: 20–45 min