Frigidaire
FRS26ZNHB0
Refrigerator
Frigidaire FRS26ZNHB0 — Error Code E35
Frigidaire FRS26ZNHB0 error code E35: Water pressure too high (overfill).
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Refrigerator error code E35 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Refrigerator E35 guide and apply to FRS26ZNHB0 unless your manual says otherwise.
Symptoms on FRS26ZNHB0
- ⚠️ Ice maker overfills, clumps ice, or leaks into the bin
- ⚠️ Water drips into the freezer or fresh-food section
- ⚠️ The refrigerator may stop calling for water after the code appears
How to Fix Error E35 on FRS26ZNHB0
- 1 Unplug the refrigerator and close the water supply valve before inspecting components
- 2 Check for a sticking inlet valve, blocked fill tube, or misaligned ice-maker fill cup
- 3 Replace an overdue water filter if flow is erratic or pressure is unstable
- 4 Have a technician test the valve and control timing if the overfill repeats
🛠️ You'll need: Screwdriver set, Pliers, Multimeter
· Time: 20–40 min