Frigidaire
EFR925-AZURE-6COM
Refrigerator
Frigidaire EFR925-AZURE-6COM — Error Code E52
Frigidaire EFR925-AZURE-6COM error code E52: Bad signal from tachometer (motor speed sensor).
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Refrigerator error code E52 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Refrigerator E52 guide and apply to EFR925-AZURE-6COM unless your manual says otherwise.
Symptoms on EFR925-AZURE-6COM
- ⚠️ Refrigerator or freezer temperatures drift warmer than normal
- ⚠️ Airflow sounds change or a fan starts and stops repeatedly
- ⚠️ Frost builds up because cold air is not circulating correctly
How to Fix Error E52 on EFR925-AZURE-6COM
- 1 Unplug the refrigerator before opening interior or rear access panels
- 2 Remove ice or debris that may be blocking the evaporator or condenser fan blade
- 3 Inspect the fan harness for loose connectors or damaged wiring
- 4 Replace a failed fan motor or schedule service if the main control is not reading speed correctly
🛠️ You'll need: Screwdriver set, Multimeter
· Time: 30–90 min