Frigidaire Refrigerator ⛔ Unplug Now

Frigidaire Refrigerator Error Code E13

Frigidaire Refrigerator error code E13: Water leak in tub or pressure switch hose..

Last reviewed: Jan 1, 0001 Last updated: Jan 1, 0001

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⛔ Yes — unplug now

Stop using immediately — water and electricity are dangerous. Unplug before inspecting.

Can I fix it myself?

Technician Recommended

Part: Door seal / inlet hose / drain hose / pump

How much will it cost?

DIY: $50–$200 (if hose/seal)

Technician: $150–$500

⏱ 30–120 min

What Does Error E13 Mean on Your Frigidaire Refrigerator?

Frigidaire Refrigerator error code E13: Water leak in tub or pressure switch hose..

What typically fails: Door seal / inlet hose / drain hose / pump

What You're Probably Seeing

→ Error code displayed
→ Refrigerator may stop cooling normally
→ Unit may need inspection

What to Try First

1 Unplug the refrigerator for 60 seconds, then restore power
2 Check the owner manual for model-specific reset steps
3 If the error returns, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Towels, Flashlight · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

More Frigidaire Refrigerator Codes

All Frigidaire refrigerator error codes → All Frigidaire appliance codes →