Bosch
WFMC530CUC/13
Washing Machine
Bosch WFMC530CUC/13 — Error Code E24
Bosch WFMC530CUC/13 error code E24: Drain hose connection error.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Bosch Washing Machine error code E24 guide →
Repair guidance: the symptoms and steps below come from the canonical Bosch Washing Machine E24 guide and apply to WFMC530CUC/13 unless your manual says otherwise.
Symptoms on WFMC530CUC/13
- ⚠️ Water left in drum after cycle
- ⚠️ Machine stops during spin
- ⚠️ Wet clothes after full cycle
How to Fix Error E24 on WFMC530CUC/13
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
- 3 Inspect the drain hose for kinks, blockages, or improper height
- 4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum
· Time: 20–45 min
Questions People Also Ask for Error E24
What does Bosch Washing Machine error code E24 mean? ▼
Error code E24 on a Bosch Washing Machine means: Drain hose connection error. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Bosch Washing Machine error code E24? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E24 returns, the root cause (drain hose connection error) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Bosch Washing Machine with error code E24? ▼
It depends on the cause. Most E24 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.