Bosch
Washing Machine
✅ Safe for Now
Bosch Washing Machine Error Code E27
Bosch Washing Machine error code E27: Mains power supply issue.
Should I unplug it?
✅ No — safe for now
Safe — unit stops when it can't fill. Check the supply hose and valve before calling a technician.
Can I fix it myself?
DIY Possible
Part: Water inlet valve / supply hose
How much will it cost?
DIY: $15–$80 (inlet valve)
Technician: $100–$250
⏱ 20–40 min
What Does Error E27 Mean on Your Bosch Washing Machine?
Bosch Washing Machine error code E27: Mains power supply issue.
What typically fails: Water inlet valve / supply hose
What You're Probably Seeing
- → Washer not filling with water
- → Long fill time
- → Machine stops mid-cycle
How to Fix It Yourself
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check that the water supply valve behind the machine is fully open
- 3 Inspect the inlet hose screen filter — sediment often blocks it (unscrew hose, clean mesh screen)
- 4 Test the water inlet valve with a multimeter — replace if no continuity ($15–$80 part)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Pliers, Multimeter
· Time: 20–40 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Bosch Washing Machine error code E27 mean? ▼
Error code E27 on a Bosch Washing Machine means: Mains power supply issue. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Bosch Washing Machine error code E27? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E27 returns, the root cause (mains power supply issue) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Bosch Washing Machine with error code E27? ▼
It depends on the cause. Most E27 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.