Bosch
SHU3305 UC/12 (FD 8003 -)
Dishwasher
Bosch SHU3305 UC/12 (FD 8003 -) — Error Code E08
Bosch SHU3305 UC/12 (FD 8003 -) error code E08: Water level in tub too low.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Bosch Dishwasher error code E08 guide →
Repair guidance: the symptoms and steps below come from the canonical Bosch Dishwasher E08 guide and apply to SHU3305 UC/12 (FD 8003 -) unless your manual says otherwise.
Symptoms on SHU3305 UC/12 (FD 8003 -)
- ⚠️ Error code on display
- ⚠️ Cycle not completing
- ⚠️ Machine stopping unexpectedly
How to Fix Error E08 on SHU3305 UC/12 (FD 8003 -)
- 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
Questions People Also Ask for Error E08
What does Bosch Dishwasher error code E08 mean? ▼
Error code E08 on a Bosch Dishwasher means: Water level in tub too low. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Bosch Dishwasher error code E08? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error E08 returns, the root cause (water level in tub too low) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Bosch Dishwasher with error code E08? ▼
It depends on the cause. Most E08 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.