Bosch
SHP9PCM**
Dishwasher
Bosch SHP9PCM** — Error Code E14
Bosch SHP9PCM** error code E14: Flow meter malfunction.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Bosch Dishwasher error code E14 guide →
Repair guidance: the symptoms and steps below come from the canonical Bosch Dishwasher E14 guide and apply to SHP9PCM** unless your manual says otherwise.
Symptoms on SHP9PCM**
- ⚠️ Error code on display
- ⚠️ Cycle not completing
- ⚠️ Machine stopping unexpectedly
How to Fix Error E14 on SHP9PCM**
- 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
Questions People Also Ask for Error E14
What does Bosch Dishwasher error code E14 mean? ▼
Error code E14 on a Bosch Dishwasher means: Flow meter malfunction. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Bosch Dishwasher error code E14? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error E14 returns, the root cause (flow meter malfunction) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Bosch Dishwasher with error code E14? ▼
It depends on the cause. Most E14 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.