Bosch
Dishwasher
✅ Safe for Now
Bosch Dishwasher Error Code E03
Bosch Dishwasher error code E03: Water not heating — heater element or NTC failure.
Should I unplug it?
✅ No — safe for now
Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.
Can I fix it myself?
DIY Possible
Part: Heating element / thermal fuse / thermistor
How much will it cost?
DIY: $20–$100 (element or thermistor)
Technician: $100–$300
⏱ 30–60 min
What Does Error E03 Mean on Your Bosch Dishwasher?
Bosch Dishwasher error code E03: Water not heating — heater element or NTC failure.
What typically fails: Heating element / thermal fuse / thermistor
What You're Probably Seeing
- → Dishes not clean or dry
- → Water not heating
- → Long cycles
What to Try First
- 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Test the heating element with a multimeter — replace if no continuity ($20–$80 part)
- 3 Check the thermal fuse — a blown fuse means there was overheating, also check the vent
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Nut driver
· Time: 30–60 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Bosch Dishwasher error code E03 mean? ▼
Error code E03 on a Bosch Dishwasher means: Water not heating — heater element or NTC failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Bosch Dishwasher error code E03? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error E03 returns, the root cause (water not heating — heater element or ntc failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Bosch Dishwasher with error code E03? ▼
It depends on the cause. Most E03 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.